Auto Cylinder
The core of a car engine is usually the cylinder. Within the cylinder, there is a piston, which functions by moving up and down, thus compressing gas which ignites the car and eventually causing combustion. The exhaust gas is then pushed out after the combustion ultimately making the crankshaft rotate, resulting in the turning of the wheels and allowing a car to move. The auto cylinder head is located at the top of the cylinder, hence acts by closing the cylinder. It is then sealed by the head gasket, thus preventing leakages of the oil or coolant into the cylinder, hence limiting the generation of heat during the combustion process. Therefore when there is a problem with any part of the engine, that is, the auto cylinder head, the car cylinder or the head gasket, then the owner of the car should look for symptoms that indicate the part of the engine need repair such as leaking, misfiring and engine overheating.
Auto Cylinder Problems
There are so many things that possibly go wrong with the car cylinders. However, some of the common signs that predict a car auto cylinder problem include:
Odors: a strong odor that has a scent that is sweet and rubbery inside a car may indicate that there is a problem, in most cases; this smell is the coolant, which could be leaking into the cylinder.
Leaks: If a liquid puddle if found under the engine, then check the coolant levels. If the coolant lights are on as well in the car, this could point to an existing problem with the cylinder, such as cracks in the head gasket of the engine.
Smoke: This is the most common problem in various cars. If gray smoke is expelled from the exhaust pipe, it signals that the engine is heating up more than it really should.
Engine Misfires: Engine misfires are another example of an auto cylinder problem. Engine misfires occur when one or more cylinder fails. When this problem becomes serious, the driver will feel a heavy vibration and shaking of the engine. In most instances, various car owners bring the vehicles into an auto repair shop complaining about the timing of the engines. An engine misfire involves mistiming of the combustion event in the cylinder of the vehicle. There are three types of misfires:
Ignition Misfire: Ignition systems problems can lead to a misfire. Typical wear and tear over time, pistons, spark plugs and some parts of the engine, may ignite the air and fuel mixtures inside the chambers of combustion. During the onset of the misfires, the sparks will be weak, and the misfire may be subtle thus, overlooked. But as the ignition components wear off, the misfires intensifies, hence resulting in the interruption f the combustion process. As a resulting of all these, shock or a severe jerk in the engine operation could occur. Besides that, the engine could backfire, causing a very loud pop. In these cases, the combustion chambers of the ignition system need constant replacement so as to prevent wear and tear of components of the engine.
Lean misfires: A lean misfire is usually as a result of the plugged filter or faulty spark plugs. It is caused by the imbalance of the air to fuel ratio. Often, there is too much air in the engine and the levels of fuel being too lean. It, therefore, causes one or more cylinder to pass unburned fuels in the exhaust system, thus prohibiting the occurrences of the combustion. This problem is quite noticeable when the vehicle is idling such as the red light because engines need more fuel for a smooth idle.
Mechanical Misfire: sometimes mechanical problems can result in engine misfires. Old piston rings, crankshafts and cylinder walls are the most common types of mechanical misfires. This type of misfire brings about a thumping beat feel in the vehicle and gets worse as the speed of the engine increases.
If an owner of the vehicle notices any auto cylinder problems, then they should take the vehicle to the mechanic. The mechanic will hook up the car to a diagnostic computer so as to check and identify any problem experienced by the engine. The diagnostic tests are efficient, quick and relatively inexpressive. All the components of the engine need to be checked regularly so as to allow the vehicle to perform smoothly and operate correctly. Any problem of the engine needs repair and replacement so that the vehicle will continue working. By solving auto cylinder problems, your vehicle is able to work efficiently and with the expected standards.